Stochastics Indicator – Excel VBA and Formula versions

This post includes  two example excel files that show both VBA and Formula based calculations for the indicator "Stochastics".

Both files contain the exact same set of Open High Low Close data. The formula based version should be easier to understand and serves as a way to verify that the VBA code that I wrote is correct. Both methods give the same result for both %k and %D.  The major benefit of using VBA is that the parameters for Stochastics can be easily changed from the input boxes. In addition the VBA method shows only the final result rather than take up five columns.

The VBA based version can be downloaded here.

The formula version can be downloaded here. Below is an image of the formulas used in the formula based version.

StochasticFormula

Below is the code that I wrote for the VBA based version.

Sub ETstochastic() 'written by Exceltrader www.exceltrader.net
Dim StochSetting As Integer, Ksetting As Integer, Dsetting As Integer
Dim A() As Double, B() As Double, C() As Double, D() As Double, E() As Double
Dim Count As Long
Dim Xcounter As Integer, Xavg As Double
Dim Zcounter As Integer, Zavg As Double
Dim x As Integer, y As Integer, z As Integer
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
''  The below three lines are the Stochastic settings.
''  The Values can either be changed here or uncomment the inputbox lines to be prompted.
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
StochSetting = 14 'InputBox(Prompt:="Enter Stoch settings Number of Periods.", Title:="Stochastic Period", Default:="13")
Ksetting = 2 'InputBox(Prompt:="Enter Moving Average For %K", Title:="%K Setting", Default:="5")
Dsetting = 3 'InputBox(Prompt:="Enter Moving Average For %D", Title:="%D Setting", Default:="6")
Set ws = ThisWorkbook.Worksheets("Svba")
    With ws
    LR = .Cells(Rows.Count, "A").End(xlUp).Row
'does the same as formula =E15-(MIN(D1:D15))
        For Each DataRange In ws.Range(.Cells(2, "A"), .Cells(LR, "A"))
        Count = DataRange.Row
        ReDim Preserve A(1 To Count)
                If Count >= StochSetting + 1 Then
                     A(Count) = .Cells(Count, "E") - Application.Min(ws.Range(.Cells(Count - StochSetting, "D") _
                     , .Cells(Count, "D")))
                End If
        Next DataRange
     'does the same as formula   =MAX(C36:C50)-MIN(D36:D50)
        For Each DataRange In ws.Range(.Cells(2, "A"), .Cells(LR, "A"))
        Count = DataRange.Row
        ReDim Preserve B(1 To Count)
                If Count >= StochSetting + 1 Then
                     B(Count) = Application.Max(ws.Range(.Cells(Count - StochSetting, "C"), .Cells(Count, "C"))) _
                     - Application.Min(ws.Range(.Cells(Count - StochSetting, "D"), .Cells(Count, "D")))
                     End If
        Next DataRange
        '=100*(I50/J50)
        ReDim Preserve C(StochSetting + 1 To UBound(B))
            For Count = StochSetting + 1 To UBound(B)
                   C(Count) = (A(Count) / B(Count)) * 100
            Next Count
        '=AVERAGE(K49:K50)
        ReDim Preserve D(StochSetting + Ksetting To UBound(B))
            For Count = StochSetting + Ksetting To UBound(B)
                For Xcounter = Count - Ksetting + 1 To Count 'just go back and get the first C and go forward to current
                    Xavg = C(Xcounter) + Xavg
                Next Xcounter
                D(Count) = Xavg / Ksetting
                Xavg = Empty
            Next Count
            ReDim Preserve E(StochSetting + Ksetting + Dsetting - 1 To UBound(B))
            For Count = StochSetting + Ksetting + Dsetting - 1 To UBound(B)
                For Zcounter = Count - Dsetting + 1 To Count 'just go back and get the first C and go forward to current
                    Zavg = D(Zcounter) + Zavg
                Next Zcounter
                E(Count) = Zavg / Dsetting
                Zavg = Empty
            Next Count
  x = Empty: y = Empty: z = Empty
  x = LBound(E)
  y = UBound(E)
  'put the stochastics on the workbook. Change column Letter as needed
  .Cells(x - 1, "J") = "%D"
  .Cells(x - 1, "I") = "%K"
  For z = x To y
  .Cells(z, "J") = E(z)
  .Cells(z, "I") = D(z)
  Next z
End With
End Sub
            
            
            

MACD VBA

This post includes links to two example xls files that show both VBA and Formula based calculations for the indicator MACD or Moving Average Convergence Divergence.

Both files contain the exact same set of Open High Low Close data. The formula based version is easier to understand and serves as a way to verify that the VBA code that I wrote is correct. Both methods give the same result.  The major benefit of using VBA is that the parameters for MACD can be easy changed from the input boxes. In addition the VBA method shows only the final result rather than take up five columns.

The VBA based version can be downloaded here.

The formula version can be downloaded here. Below is the code from the VBA based version.

Sub ETmacd() 'written by Exceltrader www.exceltrader.net
Dim EMAslow As Double, EMAfAst As Double, ws As Worksheet, LR As Integer
Dim eMaF() As Double, eMaS() As Double, EMAdif(), emaPer() As Double, MacDper As Double, coUnt As Integer
Dim DataRange As Range
Dim ExPSlowWeight As Double
Dim ExPFastWeight As Double
Dim PerWeight As Double
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
''  The below three lines are the MACD settings.                                         ''
''  The Values can either be changed here or uncomment the inputbox lines to be prompted.''
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
EMAslow = 13 'InputBox(Prompt:="Enter Macd Slow settings.", Title:="MACD SLOW", Default:="13")
EMAfAst = 5 'InputBox(Prompt:="Enter Macd Fast settings.", Title:="MACD Fast", Default:="5")
MacDper = 6 'InputBox(Prompt:="Enter Macd Period settings.", Title:="MACD Period", Default:="6")
ExPSlowWeight = 2 / (EMAslow + 1)
PerWeight = 2 / (MacDper + 1)
ExPFastWeight = 2 / (EMAfAst + 1)
Set ws = ThisWorkbook.Worksheets("VBA") 'or use exact sheet name for example ThisWorkbook.worksheet("Sheet1")
'slow
    With ws
    LR = .Cells(Rows.coUnt, "A").End(xlUp).Row
        For Each DataRange In ws.Range(.Cells(2, "A"), .Cells(LR, "A"))
        coUnt = DataRange.Row + 1
        'fill the eMA slow Array
        ReDim Preserve eMaS(1 To coUnt)
                If coUnt = EMAslow + 1 Then
                    'get the first value which is the Simple Moving average
                     eMaS(coUnt) = Application.Average(ws.Range(.Cells(2, "E"), .Cells(coUnt, "E")))
                ElseIf coUnt > EMAslow Then
                    eMaS(coUnt) = (.Cells(coUnt, "E") * ExPSlowWeight) + (eMaS(coUnt - 1) * (1 - ExPSlowWeight))
                End If
        Next DataRange
'fast
        For Each DataRange In ws.Range(.Cells(2, "A"), .Cells(LR, "A"))
        coUnt = DataRange.Row + 1
        'fill the eMA slow Array
        ReDim Preserve eMaF(1 To coUnt)
                If coUnt = EMAfAst + 1 Then
                    'get the first value which is the Simple Moving average
                     eMaF(coUnt) = Application.Average(ws.Range(.Cells(2, "E"), .Cells(coUnt, "E")))
                ElseIf coUnt > EMAfAst Then
                    eMaF(coUnt) = (.Cells(coUnt, "E") * ExPFastWeight) + (eMaF(coUnt - 1) * (1 - ExPFastWeight))
                End If
        Next DataRange
        ReDim Preserve EMAdif(EMAslow To UBound(eMaF))
            For coUnt = EMAslow + 1 To UBound(eMaF)
                EMAdif(coUnt) = eMaF(coUnt) - eMaS(coUnt)
            Next coUnt
'MacD Period
        Dim x As Integer, y As Integer, z As Integer, Avee As Double
        y = EMAslow + MacDper - 1
            For x = y To UBound(EMAdif) - 2
                'get the SMA for first value
                If x = y Then
                        For z = EMAslow + 1 To EMAslow + MacDper  '(EMAslow + MacDper - 1)
                        Ave = Ave + EMAdif(z)
                        Next z
                        ReDim emaPer(x To LR)
                        emaPer(x) = Ave / MacDper
                ElseIf x > y Then
                emaPer(x) = (EMAdif(x + 1) * PerWeight) + (emaPer(x - 1) * (1 - PerWeight))
                End If
            Next x
  x = Empty: y = Empty: z = Empty
  x = LBound(emaPer)
  y = UBound(emaPer)
  For z = x To y - 1
  .Cells(z + 1, "J") = EMAdif(z + 1) - emaPer(z)
  Next z
End With
End Sub 'written by Exceltrader www.exceltrader.net

MACD

The following excel file is an example of how to calculate the MACD indicator. This example shows the 5, 13, 6, setting. the MACD is in column N.  Over time I may add more excel indicator examples. As I do they will be most easily found in the right sidebar under the “How to” – “Indicators” category.

MACD example in excel.